LOCTITE® 549 is an orange, medium-strength, slow-curing gasket sealant for close-fitting metal flanges. Its thixotropic consistency supports neat application and it provides an instant seal to low pressures immediately after assembly.
LOCTITE® 549 is a single-component anaerobic gasketing product that cures in the absence of air between close-fitting metal surfaces. It forms a durable seal that resists vibration and leakage while still permitting disassembly if required. It is ideal for demanding flange applications in pumps, compressors, thermostat housings and transmission components. The orange colour offers clear visual confirmation of coverage and no mixing is necessary before use.
Colour is orange and thixotropic in appearance
Viscosity ranges between 10 000 and 35 000 mPa·s (Brookfield RVT, spindle 6, 20 rpm)
Shear strength on grit-blasted steel is 3.6 N/mm² (520 psi) after 72 hours cure
Fixture time under typical conditions is immediate low pressure hold with full cure achieved within 24 to 72 hours ()
Service temperature range extends from –55 °C to +150 °C
Shear strength at 24 hours exceeds 2 200 psi (15.2 N/mm²) on steel
Primary Chemistry: Methacrylate ester
Eliminates flange leakage caused by fluid ingress or vibration Removes the need for pre-cut gaskets and associated inventory Supports leak prevention in assemblies under low internal pressures Provides flange sealing without mess or risk of paint contamination
Use LOCTITE® 549 for flange joints in metal housings such as pumps, compressors, transmissions and axle assemblies Apply a complete 360° bead to clean flange faces, assemble and tighten to specification The seal will resist low pressures immediately, while full cure develops over time Supports manual or ground-tool disassembly if needed; heating may assist in removal No primer required on clean metal surfaces
Your document download will begin shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you for your inquiry and interest in ChemPoint.
We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you for your inquiry and interest in ChemPoint.
We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
The document currently is provided in the following languages from the supplier at this time.
The document currently is provided in the following languages from the supplier at this time.
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
